Fig Leaf / free-weaving process

I used my own free-weaving process that I sort of make up as I go along. I've laid out the steps I went through below. (Forgive the poor quality of the pics.)

I first drew a cartoon on cardboard from a composite of found photo images – the cardboard cartoon was both loom and a loose color / value guide

Then I cut around the cartoon

Next, I stitched in the main structures (in this case veining) with strong cotton yarn sewn directly to the cardboard

And then stitched it to another piece of slightly larger cardboard and outlined the whole leaf with heavy wool yarn that I secured with thread

I trimmed the base cardboard and cut notches in the edges to hold loose threads… then began free-weaving

I just kept filling in more areas and changing threads often

At this point, I’ve woven to the density I want. This is weeks worth of work for something not much bigger than my extended hand, but is exactly what I want as far as size and structure

…the back side with all the loose threads tucked in their respective notches… and here you can see the source of cardboard – a pizza box from The Red Onion, a fine mom and pop pizzeria with great pizza.

Then I separated the two cardboards with the seam ripper

The two pieces of cardboard

This is the tricky part: I had to cut away the structural yarns from the original cartoon being careful not to pull them out of the weaving

The freed form… looks like a sea creature

I wove the ends back into the weaving as I would with a tapestry… and again, a very long process… only half-way done at this point

The front side